Multiprens winch bars are used with winches to tighten and secure winch straps and cables. Multiprens winch bars are designed with a knurled non-slip handle and tapered tip for easy use. Standard winch bars SHOULD NOT be used to tighten Chain Binders. Combination winch bars have a boxed end that is used for tightening winch straps, cables, in addition to lever type chain binders.

Winch Bars
Chain
Chain Load Binders
Strap Winder
Rubber Tarp Straps
Webbing Protectors
Forged D Ring with Weld Clip

Winch Bars

4100 - Winch Bar Painted-Standard

Weight: 2.27 kgs./ 5 lbs.

4101 - Winch Bar Chrome-Standard

Weight: 2.27 kgs./ 5 lbs.

4001 - Winch Bar Chrome Combination-Box Type

Weight: 2.95 kgs./ 6.5 lbs.

4003 - Winch Bar Painted Combination-Box Type

Weight: 2.95 kgs./ 6.5 lbs.

Chain Assemblies

Multiprens has available Transport Grade 70 Chain. Multiprens Grade 70 Transport Chain is designed for securing heavy-duty cargo. It is rated approximately 20% higher than High Test Grade 43 Chain. The increased strength offers lighter weight, easier handling and storage. The Transport Chain does meet Department of Transportation (DOT) and California Highway Patrol (CHP) guidelines.

Grade 70 Transport Chain
Part Number	Grade	Size	Length	End Fitting	BS	WLL	WEIGHT
4456-20-D	70	5/16"	20 FT	Clevis Hooks	8,530 kgs./ 18,800 lbs.	2,135 kgs./ 4,700 lbs.	9.09 kgs./ 20 lbs.
4456-25-D	70	5/16"	25 FT	Clevis Hooks	8,530 kgs./ 18,800 lbs.	2,135 kgs./ 4,700 lbs.	12 kgs./ 26.4 lbs.
4438-20-D	70	3/8"	20 FT	Clevis Hooks	12,000 kgs./ 26,400 lbs.	3,000 kgs./ 6,600 lbs.	14.91 kgs./ 32.8 lbs.
4438-25-D	70	3/8"	25 FT	Clevis Hooks	12,000 kgs./ 26,400 lbs.	3,000 kgs./ 6,600 lbs.	18.45 kgs./ 40.6 lbs.
ALL CHAIN LISTED ABOVE MANUFACTURED IN THE USA
4456-20-F	70	5/16"	20 FT	Clevis Hooks	8,530 kgs./ 18,800 lbs.	2,135 kgs./ 4,700 lbs.	8.82 kgs./ 19.4 lbs.
4456-25-F	70	5/16"	25 FT	Clevis Hooks	8,530 kgs./ 18,800 lbs.	2,135 kgs./ 4,700 lbs.	10.91 kgs. 24 lbs.
4438-20-F	70	3/8"	20 FT	Clevis Hooks	12,000 kgs./ 26,400 lbs.	3,000 kgs./ 6,600 lbs.	13.71 kgs./ 30.16 lbs.
4438-25-F	70	3/8"	25 FT	Clevis Hooks	12,000 kgs./ 26,400 lbs.	3,000 kgs./ 6,600 lbs.	16.95 kgs./ 37.3 lbs.
ALL CHAIN LISTED ABOVE IS IMPORTED

Chain Load Binders Grade 70

4228 - 5/16” – 3/8” Grade 70 Lever Type Binder

Over center lever chain binder locks securely when binding or releasing. Fits 5/16" and 3/8" chain.
Breaking Strength: 8,620 kgs./ 19,000 lbs.
Working Load Limit: 2,450 kgs./ 5,400 lbs.
Weight: 4.09 kgs./ 9 lbs.

4338 - 5/16” – 3/8” Grade 70 Ratchet Type Binder

Easy to operate ratchet binder locks securely when binding or releasing. Fits 5/16" and 3/8" chain.
Breaking Strength: 8,620 kgs./ 19,000 lbs.
Working Load Limit: 2,450 kgs./ 5,400 lbs.
Weight: 3.86 kgs./ 8.5 lbs.

Steel Strap Winder

4800 - Steel Strap Winder

Multiprens Steel Strap Winder is used on the outer rail or rub rail of flatbed trailers. The strap winder provides a fast and trouble-free method of winding 2”, 3”, or 4” webbing straps and can easily be stored. The strap winder can be used either right or left-handed and has tapered forks for easy webbing insertion and removal.
Weight: .91 kgs./ 2 lbs.

Rubber Tarp Straps

Rubber Tarp Straps are made for restraining tarp covers on flatbed trailers. Multiprens rubber tarp straps are imported and made of EPDM Synthetic Rubber Polymer. Multiprens rubber tarp straps are not to be used for tying down or securing cargo. THESE STRAPS ARE DESIGNED TO HOLD TARP COVERS IN PLACE. Rubber Tarp Straps are available in different lengths of 9”, 15”, 21”, 31”and 41”.

PART NUMBER	Strap Length	Overall Length w/ Hooks	Minimum Installed Length	Maximum Installed Length	Weight per 50 PCS	BOX QTY
5409	9"	13"	14"	18"	10	50
5415	15"	19"	21"	27"	13	50
5421	21"	25"	28"	36"	16	50
5431	31"	35"	39"	51"	21	50
5441	41"	45"	50"	66"	24	50

Cordura Sleeve Web Protector

Multiprens cordura sleeve web protector is manufactured of heavy-duty abrasion resistant nylon material. Cordura sleeve gives the protection necessary securing cargo in place and had the flexibility for conforming to flatbed loads. Stocked in standard 12" lengths. Contact Multiprens Customer Service for special lengths.

602-1-CS - 2" X 12" Cordura Sleeve for 2" Straps

604-1-CS - 4" X 12" Cordura Sleeve for 4" Straps

Corner Protectors

Multiprens Corner Protectors will protect the winch strap from abrasion and the cargo from damage. Corner Protectors are available in plastic, steel and steel with rubber backing.

4610 - Plastic Corner Protector

Plastic Corner Protector designed to protect both strap and cargo. Plastic corner protects feature a corner recess to protect cargo edges. For 2” and 4” web.
Weight: .09 kgs./ .2 lbs.

4700 - Steel Corner Protector

The steel corner protector is constructed of heat treated 12 gauge steel. It is used to protect the product when using chain to secure heavy-duty cargo.
Weight: .59 kgs./ 1.3 lbs.

4750 - Steel Corner Protector with Rubber Backing

The steel corner protector with rubber backing is constructed of heat treated 12 gauge steel and vulcanized rubber in the recessed area. It is used when transporting soft metals. The rubber on the chain protector keeps the metal edges on the chain protector from damaging soft metals when secured with chain.
Weight: .91 kgs./ 2 lbs.

Forged D Ring With Weld Clip

Multiprens has available 1/2-inch and 5/8-inch Forged D Ring with Weld Clip for utility trailers and 3/4-inch and 1-inch for gooseneck and other heavy-duty trailer platforms. The Forged D Ring with Weld Clip is manufactured of heavy-duty heat treated steel. Contact Multiprens Customer Service for product information.

PART NO.	SIZE	WEIGHT
DR-1/2-12K	1/2" x 1 1/4" x 2 1/2"	.43 kgs. / .94 lbs.
DR-5/8-15K	5/8" x 3" x 3"	.85 kgs. / 1.87 lbs.
DR-3/4-24K	3/4" x 3" x 3"	1.23 kgs. / 2.70 lbs.
DR-1-3-45K	1" x 3" x 3"	1.91 kgs. / 4.20 lbs.
DR-1-4-45K	1" x 3" x 4"	2.15 kgs. / 4.73 lbs.

Back to top