1161 Standard 3-Bar Frameless Leg Winch

The Standard 3-Bar Frameless Leg Winch is designed to be permanently mounted to the trailer frame in a fixed position.
Breaking Strength: 6,820 kgs/15,000 lbs
Working Load Limit: 2,275 kgs/5,000 lbs
Weight: 3.18 kgs./ 7 lbs

1163 Standard 3-Bar Weld-On Winch

The Standard 3-Bar Weld-On Winch is designed for easy strap insertion in inclement weather such as ice or snowy conditions. In normal weather conditions the wide slot openings allow the strap ends to easily be inserted.
Breaking Strength: 6,820 kgs/15,000 lbs
Working Load Limit: 2,275 kgs/5,000 lbs
Weight: 6.64 kgs./ 14.6 lbs

1162 Low Profile 3-Bar Weld-On Winch

The Low Profile 3-Bar Weld-On Winch is designed for easy strap insertion in inclement weather such as ice or snowy conditions. In normal weather conditions the wide slot openings allow the strap ends to easily be inserted.
Breaking Strength: 6,820 kgs/15,000 lbs
Working Load Limit: 2,275 kgs/5,000 lbs
Weight: 6.32 kgs./ 13.9 lbs

1860 Side Mount Bolt on Winch

The Side Mount Bolt on Winch is designed to bolt onto the side frame and bottom flange of the side rail.
Breaking Strength: 6,820 kgs/15,000 lbs
Working Load Limit: 2,275 kgs/5,000 lbs
Weight: 4.09 kgs./ 9 lbs

Special Application Winch Specifications

PART NUMBER A (INCHES) B (INCHES) C (INCHES) D (INCHES) Weight (kgs./ lbs)
1161 10 6 1/2 5 1/2 3 1/2 5.23 kgs 11.5 lbs
1162 10 1/8 6 1/2 4 1/4 4 6.3 kgs 13.9 lbs
1163 10 1/8 6 1/2 5 1/2 4 6.6 kgs 14.6 lbs
1860 8 5 6 5 4.14 kgs 9.1 lbs
winch diagram

To insure proper engagement, all winches shall be installed so the user can see the pawl. Additionally, the winch shall be positioned so the pawl drops into the ratchet teeth by gravity. Winches shall never be installed in a position where the user cannot see the pawl engagement, or where they must hold the pawl to engage the ratchet tooth. All winches, except portable and sliding styles, must be welded or bolted to the vehicle structure. Minimum welding requirements are 1/4" fillet weld, 4" long on both sides of the frame and 1/8" penetration. If winches are installed in track, the track shall be attached to the vehicle structural members. The vehicle structure should have equal or greater strength than the winch.