Multiprens Jacking Type Load Bars are the best built in the United States market. Jacking Type Load Bars use a high quality Jacking Type mechanism. The steel tubing used is zinc plated to provide rust and corrosion resistance. The rubber weld on feet are 4” x 4” non-marking and provide a firm grip to the trailer walls.

Heavy Duty
Medium Duty

MULTI-BAR HEAVY DUTY SQUARE– ZINC PLATED

MB-801 - Heavy Duty One Piece Load Bar

Adjustable length 84" to 113"
Weight: 6.8 kgs./ 15 lbs.
Multiprens MB-801 is a One Piece Jacking Type Load Bar. It is made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall and from floor to ceiling.

MB-802 - Heavy Duty Two Piece Load Bar

Adjustable length 84" to 113"
Weight: 6.8 kgs./ 16 lbs.
Multiprens MB-802 is a Two-Piece Jacking Type Load Bar that is designed for easy storage and to prevent theft. The bar divides into two pieces allowing for easy storage in the cab. Multiprens Jacking Type Load Bar are made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber.

Dimensions: Extending Mechanism: 44 ¼ Inches Foot Section: 44 ½ Inches

MB-803 - Heavy Duty Three Piece Load Bar

Adjustable length 84" to 105"
Weight: 8.2 kgs./ 18 lbs.
Multiprens MB-803 is a Three-Piece Jacking Type Load Bar that is utilized to prevent theft. The bar divides into three pieces allowing for easy storage in a toolbox or in the cab. Multiprens Jacking Type Load Bar are made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber.

Dimensions: Extending Mechanism: 32 inches Middle Section: 31 Inches Foot Section: 31 Inches

MB-804 - Heavy Duty Two Piece Load Bar with Center Pad

Adjustable length 84" to 113"
Weight: 8.2 kgs./ 18 lbs.
Multiprens MB-804 is a Two-Piece Jacking Type Load Bar with a rubber footpad in the center. This bar can be utilized wall to wall and from floor to ceiling. The easy to use push button latch in the center allows the load bar to be divided and used for single skid securing. Multiprens Jacking Type Load Bar is made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber.

MB-805 - Heavy Duty One Piece Load Bar with 147" Extension

Adjustable length 84" to 147"
Weight: 9.09 kgs./ 20 lbs.
Multiprens MB-805 is an Extended Length Jacking Type Load Bar. Its extended adjustment allows the load bar to be used wall to wall, floor to ceiling and diagonally across the trailer when securing cargo. Multiprens Jacking Type Load Bar is made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber.

MB-809 - Heavy Duty One Piece Load Bar with Weld-On Hoops

Adjustable length 84" to 113"
Weight: 10.5 kgs./ 23 lbs.
Hoop Width: 22 1/2"
Hoop Lenth: 68 1/4"
Multiprens MB-809 is a One Piece Jacking Type Load Bar with Weld-On Hoops. Weld-on hoops allow for wider coverage when securing cargo. Multiprens Jacking Type Load Bar is made with 1 ½” square 15 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall and from floor to ceiling.

NOTE: Multiprens Jacking Type Load Bars have no ratings due to variations with Interior Van Trailer walls.

ECONOMY BAR/MEDIUM DUTY ROUND-ZINC PLATED

EM-801 - Medium Duty One Piece Load Bar

Adjustable length 84" to 105"
Weight: 5.9 kgs./ 13 lbs.
Multiprens economical EM-801 is a One Piece Jacking Type Load Bar. It is made with 1.66” round 16 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall.

EM-802 - Medium Two Piece Load Bar

Adjustable length 84" to 105"
Weight: 6.3 kgs./ 14 lbs.
Multiprens economical EM-802 is a Two Piece Jacking Type Load Bar. The load bar is designed to prevent theft and divides into two pieces for easy storage. It is made with 1.66” round 16 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall.

Dimensions: Extending Mechanism: 44 inches Foot Section: 44 inches

EM-803 - Medium Duty Three Piece Load Bar

Adjustable length 84" to 105"
Weight: 6.3kgs./ 14 lbs.
Multiprens economical EM-803 is a Three Piece Jacking Type Load Bar. The bar divides into three pieces allowing for easy storage in a toolbox or in the cab. It is made with 1.66” round 16 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall.

Dimensions: Extending Mechanism: 31 ½ inches Middle Section: 30 inches Foot Section: 31 ½ inches

EM-809 - Medium Duty One Piece Load Bar with Weld-On Hoops

Adjustable length 84" to 105"
Weight: 10 kgs./ 22 lbs.
Hoop Width: 22 1/2"
Hoop Lenth: 68 1/4"
Multiprens economical EM-809 is a One Piece Jacking Type Load Bar with Weld-On Hoops. Weld-on hoops allows wider coverage when securing cargo. It is made with 1.66” round 16 gauge steel tubing. The rust resistant tubing is zinc plated. The Jacking Type mechanism features an easy to use locking system. Weld-on feet are 4” x 4” and made of non-marking rubber. This bar can be utilized wall to wall.

NOTE: Special Lengths are available. Custom Stenciling and Painting can be done. Contact Multiprens Customer Service for special applications.

Jack Bar Replacement Parts

Replacement Parts Multi and Economy Bars	Description	Weight KGS/LBS
225	4" x 4" Bolt on Foot Pad for Small Tube	.36 kgs./ .81 lbs.
226	4" x 4" Bolt on Foot Pad for Large Tube	.49 kgs./ 1.09 lbs.
298-9A	4"x 4” Weld on Foot Pad with Metal Insert	.25 kgs./ .56 lbs.
HG-198	Handle Grip	.05 kgs./ .11 lbs.
JM-857	Jacking Mechanism Zinc Plated for Multi-Bar and Economy Bar	2.05 kgs./ 4.5 lbs.
LB-132	Top Lever	.02 kgs./ .05 lbs.
SP-887	Spring	.009 kgs./ .02 lbs.
PA-133	Pawl Repair Kit Includes Pawl and Handle (no grip)	1.26 kgs./ 1.75 lbs.

Back to top